Cut-Resistant Glove(58030110)
*UHMV-PE
*Palm PU Coated
*Size:8
*EN388 Approved
*Abrasion Resistance 4
*Cutting Resistantce 5
*Tear Resistance 4
*Puncture Resistance 3
We can supply all kinds of gloves, if you can't found the exact model here, just contact, send us photoes of the product you prefer to, we will reply to you ASAP.
Appliance:
*Car assembly,General maintenance Work,Light assembly,Manufacturing ,Handling Small Objects.
Size:
7S,8M,9X,10XL,11XXL
Standard EN 388:2003
Glovess giving protection from mechanical risks
Scope:
This standard applies to all kinds of protective gloves in respect of physical and mechanical aggressions caused by abrasion,blade cut,puncture and tearing.
Definition and Requirements:
Protection againist mechanical hazards is expressed by a pictogram followed by four numbers(performance levels),each representing test performance against a sprcific hazard.
A.Resistance to abrasion
Based on the Number of ctcles required to abrade through the sample glove
B.Blade cut resistance:
Based on the number of cycles required to cut through the sample at a constant speed
C.Tear Resistance
Based on the amount of force required to tear the sample
D.Puncture Resistance:
Based on the amount of force required required to pierce the sample with a standard-sized point.
Test |
Performance Level |
|
0 |
1 |
2 |
3 |
4 |
5 |
Abrasion resistance(cycle) |
<100 |
100 |
500 |
2000 |
8000 |
|
Blade resistance(factor) |
<1.2 |
1.2 |
2.5 |
5 |
10 |
20 |
Tear resistance(newton) |
<10 |
10 |
25 |
50 |
75 |
|
Puncture(newton) |
<20 |
20 |
60 |
100 |
150 |
|
These Performance levels must be prominently displayed alongside the pictogram on the gloves and on the packaging which immediately contains the gloves. anc