4 x 4 ALUMINUM MULTI-PURPOSE JOINT LADDER WITH SMALL HINGE WITH EN131
Model: HT0362604
--------------------------------------------------
SPECIFICATION
No. of step: 4 x 4, including 6 small hinges
Material: aluminum + steel
Thickness: 1.0mm
Frame width: 34cm
Step spacing: 28cm
Weight: ≥11kg
Max loading: 150kg
Size:
* Straight length: 470cm
* A shape height: 225cm
* Scaffold height: 127cm
--------------------------------------------------
PACKAGE
Shrinkage with color paper or Graphic carton
G.W.: 12.2kg
N.W.: 11.2kg
Carton size: 126cm x 28cm x 35cm
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
MULTI-PURPOSE LADDER WITH EN131
SAFETY INSTRUCTIONS
> To ensure your safety please read this instruction manual carefully.
> This manual should kept for future reference.
SAFETY INSTRUCTIONS
> This ladder may only be used in the positions as shown above.
> Due care and attention should be paid at all times when using the ladder.
> Always check the stability of the ladder by ensuring that it is placed on level and solid ground.
> Always check that all hinges are in the correct positions for your particular use.
> The platform may only be used when the ladder is in one of the horizontal positions.
> Set at proper (75.5 degree) angle in straight position.
IMPORTANT: Stabilizers must be fitted before using.
Assembly Instructions
> Place the stabilizer bar into the end of the side rails (see diagram).
> Secure the stabilizer bar with the nut and bolt.
CARE & MAINTENANCE
> The hinges should be lubricated with a good quality lubricant to ensure mobility.
> The hinges should be cleaned after use especially when the hinges have been subjected to dust or dirt.
> Clean the area, or wash with warm water. However should water be used on the hinges, please remember to re-lubricate after drying.
IMPORTANT: This ladder should never be used if any part is missing, damaged or worn.
Following the above instructions will help to maintain your appliance and ensure its maximum lifespan.
HINGES
> To unlock the hinges simply move the handle to the "o" unlock position (see diagram) and then fold the ladder section inward.
> The hinges will automatically lock into position once the ladder is unfolded.
> Always check that all hinges are securely locked into position before using the ladder.
> Each pair of hinges must be locked simultaneously.
> It is extremely dangerous to attempt to alter the positioning of the ladder, hinges or operating joints while the ladder is in use.
> Always keep the joints clean and free from all foreign materials, it is advisable to cover the joints during exceptionally messy jobs.
CAUTION
To open the ladder section:
Place the locking pin (black) to the "O" position.
The hinge is locked when in the "L" position.
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
Audited Supplier 
){kind=link}
){kind=link}