High Quality PPE Cut-resistance Safety Glove(58030127)
Features:
*CE EN388 Approved
*33%High-Strength Polyester thread,55%Stainless wire,10%terylene,2%elastic cord
*Cow Leather Jaw
*Cutting resistance 5
*Abrasion Resistance 3
*Tear Resistance 4
*Puncture Resistance 3
Definition and Requirements:
Protection againist mechanical hazards is expressed by a pictogram followed by four numbers(performance levels),each representing test performance against a sprcific hazard.
A.Resistance to abrasion
Based on the Number of ctcles required to abrade through the sample glove
B.Blade cut resistance:
Based on the number of cycles required to cut through the sample at a constant speed
C.Tear Resistance
Based on the amount of force required to tear the sample
D.Puncture Resistance:
Based on the amount of force required required to pierce the sample with a standard-sized point.
| Test |
Performance Level |
| |
0 |
1 |
2 |
3 |
4 |
5 |
| Abrasion resistance(cycle) |
<100 |
100 |
500 |
2000 |
8000 |
|
| Blade resistance(factor) |
<1.2 |
1.2 |
2.5 |
5 |
10 |
20 |
| Tear resistance(newton) |
<10 |
10 |
25 |
50 |
75 |
|
| Puncture(newton) |
<20 |
20 |
60 |
100 |
150 |
|
These Performance levels must be prominently displayed alongside the pictogram on the gloves and on the packaging which immediately contains the gloves. anc
Audited Supplier 
){kind=link}
){kind=link}