Safety Gloves for Heavy Duty
EN388
Abrasion Resistance: 4
Blade cut Resistance: 4
Tear Resistance: 4
Kevlar, terylene +Steel thread
Appliance:
*Car assembly,General maintenance Work,Light assembly,Manufacturing ,Handling Small Objects.
Size:
7S,8M,9X,10XL,11XXL
Standard EN 388:2003
Glovess giving protection from mechanical risks
Scope:
This standard applies to all kinds of protective gloves in respect of physical and mechanical aggressions caused by abrasion,blade cut,puncture and tearing.
Definition and Requirements:
Protection againist mechanical hazards is expressed by a pictogram followed by four numbers(performance levels),each representing test performance against a sprcific hazard.
A.Resistance to abrasion
Based on the Number of ctcles required to abrade through the sample glove
B.Blade cut resistance:
Based on the number of cycles required to cut through the sample at a constant speed
C.Tear Resistance
Based on the amount of force required to tear the sample
D.Puncture Resistance:
Based on the amount of force required required to pierce the sample with a standard-sized point.
| Test |
Performance Level |
| |
0 |
1 |
2 |
3 |
4 |
5 |
| Abrasion resistance(cycle) |
<100 |
100 |
500 |
2000 |
8000 |
|
| Blade resistance(factor) |
<1.2 |
1.2 |
2.5 |
5 |
10 |
20 |
| Tear resistance(newton) |
<10 |
10 |
25 |
50 |
75 |
|
| Puncture(newton) |
<20 |
20 |
60 |
100 |
150 |
|
These Performance levels must be prominently displayed alongside the pictogram on the gloves and on the packaging which immediately contains the gloves. anc
Audited Supplier 
){kind=link}
){kind=link}